Product Overview
The PC-200 is RecordALL’s process controller — a microprocessor instrument for batching and filling that totalizes, indicates and controls fluid flow. It takes a pulse from an open-collector or dry-contact meter output, scales it to any unit of measure, and shows total, accumulated total and rate of flow; preset a target and its on-board relays start and stop the fill, for both small and large quantities. A pulse output passes the count downstream. Any Badger Meter industrial flow meter with a pulse output drives it, and it mounts in a panel or in the field.
Key Features & Benefits
- Batch and fill control — preset a target quantity and the controller drives its relays to start and stop the fill — small or large batches
- Totalize, indicate, control in one box — one instrument shows total, accumulated total and rate of flow and acts on the reading — no separate counter and relay block
- Programmable pulse scaling — accepts an open-collector or dry-contact meter pulse and scales it to the engineering unit you batch in
- Drives any RecordALL meter — any Badger Meter industrial flow meter with an open-collector, reed-switch or active pulse output can feed it
- Relay plus pulse output — relays for control and a pulse output to pass the count downstream
Specifications
- Function
- A microprocessor process controller for batching and filling small and large quantities, with total, accumulated total and rate-of-flow display — it totalizes, indicates and controls fluid flow
- Inputs
- Pulses from open-collector transistors or dry-contact closures, scaled to any unit of measure
- Batch / fill control
- Preset batch and fill control for both small and large quantities
- Relay outputs
- On-board relays to start and stop the fill
- Signal output
- Pulse output
- Display
- Total, accumulated total and rate of flow
- Meter compatibility
- The complete line of Badger Meter industrial flow meters
- Mounting
- Panel or field mount
Common Applications
- Preset batch and fill systems for small and large quantities
- Process dosing and dispensing with relay start / stop control
- Tank filling and blending where the meter has to act on the count, not just display it
- Closing the loop on a RecordALL pulse meter at the point of use
To size & select the right PC-200 Process Controller:
Use the input form to tell us the meter and what the read-out has to do — a local total, a resettable rate / total counter, a scaled pulse or 4–20 mA into a PLC or SCADA, batch control, or a cellular cloud read — and we’ll match the register, transmitter or controller to it.
Flow Meter Application Sheet ›Talk to an engineer directly — Scott Prater, Principal · 917-580-0878 · scott@pratertechnical.com
Specifications compiled by Prater Technical Partners from Badger Meter RecordALL commercial & industrial water-meter product literature.