About this category
WIKA Sensor Technology displays, amplifiers & cables are the electronics that finish the measuring chain — every mV/V load cell, load pin, and transducer on this site needs one of them at the other end of the wire. The PMD-50E panel display excites the bridge, shows the number, and alarms on it; the ILA / ICE amplifiers (and factory-fitted internal boards) condition the signal right at the sensor so it travels as ±10 V or 4–20 mA; the UDA DIN-rail amplifier does the same job cabinet-side, one universal module for any bridge; and the DI25 / B6494 digital indicators put process signals and load-cell weighing on the panel with relays and MODBUS. Match the electronics to the signal and the distance — Prater Technical works with you to spec the right WIKA-ST display or amplifier.
Click any Series box for details →

PMD-50E Panel
Displays
Bridge excitation, 5-digit readout, 6 relays & retransmission in 1/8 DIN

In-Line & In-Cable
Amplifiers
ILA box / ICE cable barrel / internal boards — mV/V to V or mA at the sensor

UDA DIN-Rail
Amplifiers
One universal chopper-stabilized module for any bridge in the cabinet

Digital
Indicators
DI25 process indicator & B6494 load-cell weighing indicator
Connecticut: Full state
Massachusetts: Full state
Rhode Island: Full state
New Jersey: Northern NJ
Pennsylvania: Eastern PA — Allentown–Philadelphia corridor
Specifications compiled by Prater Technical Partners from WIKA Sensor Technology Displays, Amplifiers & Cables product datasheets.
